Stein Music

Aventurin 6 MC Cartridge

€4.998
  • Each system is handmade in our manufactory and tested in all parameters including a final listening test before delivery.
  • Handcrafted housing made of a carbon / mahogany composite for best resonance control
  • Cast bronze base for maximum stability
  • designed for MC systems

The SteinMusic Aventurin 6 Cartridge Low Output MC cartridge is a unique overall concept that produces a detailed and natural sound with great finesse and overall coherence. With something as sensitive as a cartridge, this can only succeed if great attention is paid to every detail. For the stylus, we have chosen a diamond with a micro ridge cut. This has excellent scanning characteristics, while at the same time being extremely gentle on the record grooves. In addition, the Micro Ridge cut has the advantage of even wear over the long term, while maintaining the optimal scanning profile of the needle. For the needle carrier our choice became a solid boron rod. This combines the aspects of torsional stiffness and lightness in an ideal way. The coils themselves are wound from high-purity 6N copper, which has been further treated with a special technology developed in-house. We have paid great attention to the damping rubber, which is largely overlooked but has a significant influence on the final overall result. 

The basis of the Steinmusic Aventurin pickup systemis the harmonic construction of a cast bronze structure as the base in combination with a carbon/mahogany body. Here too, we have optimized every detail to achieve an overall result at the highest level. The base is made of a special bronze alloy, which has been optimized for its acoustic properties. It is not machined, but cast in order to obtain a stress-free structure. The mass distribution and geometry of this base is optimized to give the generator a stable working base and to effectively dissipate resonances. After a long series of tests with different materials, we decided to use a composite of mahogany and carbon for the cabinet, in order to achieve the best tonal results in combination with the bronze base. A final treatment with Steinmusic Maestro lacquer then makes the overall result perfect. All these details of the Aventurin 6 cartridge have been optimized in long listening tests, so that the result perfectly meets our expectations of a natural sounding cartridge.Aventurin 6 MC Cartridge- Each system is handmade and tested before delivery in all parameters including a final listening test.Use in complete perfection with the Ametrin 1 Composite Headshell

 

Reviews of the Aventurin 6 MC Cartridge


Digital Reviews - Ayon Audio

Technical Specifications of the SteinMusic Aventurin 6 Cartridge

  • Frequency Range: 10 Hz- 50,000 Hz
  • Frequency Response: 20 Hz – 25,000 Hz +/- 1dB
  • Output Voltage: 0,4 mV (@3.54cm/sec/45Deg. 1,000 Hz)
  • Output Impedance: 14 ohm @ 1,000 Hz
  • Channel Separation: 35 dB or more
  • Channel Balance: Below 0,5 dB
  • Compliance: 12 μm/mN
  • Cantilever Material: solid boron rod Stylus Chip: Micro-ridge diamond.
  • Recommended Stylus Pressure: 1,8-2,2 grams
  • Vertical Tracking Angle: 20-22 degrees
  • Weight: 11,5 grams
  • Optimal load resistance: 300 – 10,000 Ohms
  • Tracking ability at 315Hz and 2 gram tracking force > >80μm
  • Suitable for Phono Stages with about 60 dB gain
  • lacquered with Stein Music Maestro Lacquer for optimum resonance control
  • Cast bronze base for maximum stability
  • Handcrafted housing made of a carbon / mahogany composite for best resonance control
  • Please allow at least 50 hours break in time
  • MC systems for use on medium-heavy arms
  • Each system is handmade and tested before delivery in all parameters including a final hearing test
  • The basis is a cast and therefore stress-free, resonance-optimised bronze carrier.
  • Resonance-optimised and specially lacquered wooden cabinet
  • The needle carrier consists of a lightweight, torsion-resistant boron tube
  • Optimised needle geometry for cleanest scanning with lowest distortion
  • High efficiency neodymium magnet

 

To achieve the perfect sound, SteinMusic places great emphasis on precise craftsmanship and careful development. Each product is made in Germany by experienced craftsmen and technicians who use their extensive know-how to achieve the highest sound quality in our products.

Through a combination of advanced technology and traditional craftsmanship, we strive to provide the best possible listening experience. Our commitment to quality and detail-oriented manufacturing is central to our philosophy of creating audiophile products that meet the highest standards.

Handmade in Germany SteinMusic

Worldwide Shipping: We ship our products worldwide.

  • Germany:
    • Express: 1-2 business days.
    • Standard: 2-4 business days.
  • Europe:
    • Express: 1-4 business days.
    • Standard: 2-8 business days.
  • Rest of the World:
    • Express: 2-5 business days.
    • Standard: 5-13 business days

Shipping costs

The shipping cost for your region will be displayed in the checkout process. Please note that additional duties or import fees may apply and are the responsibility of the customer.

Return Policy

You have 14 days after receiving the goods to test the product and return it if necessary.

You may also like

Recently Viewed